
Family-owned · Bastrop Local
Cabinet Refinishing That Outlasts a Fresh Coat of Paint
Proper prep, quality primer, and a durable finish, handled by the owner, not a crew you've never met.
Free estimate
Tell us what you need
Three fields. It reaches a person here, not a call centre.
Cabinet Renewal Worth Getting Right
Refinishing your cabinets is one of the highest-return projects in a kitchen renovation, but only when the prep work is done right. A lot of painters will sand lightly, roll on a coat, and call it done. Two years later, the finish is peeling at the edges and chipping around the pulls. Julio Cardona has spent five years doing this work differently: every surface gets cleaned down to bare material before primer ever touches it, because a lasting bond starts with a surface that's actually ready. If you want cabinet renewal that still looks sharp after years of daily use, call (512) 786-6801 for a free estimate.
The cost of cabinet refinishing depends on how many doors and drawer fronts you have, what condition the existing finish is in, and what type of topcoat you're after. A kitchen with a heavy grease buildup or multiple layers of old paint takes more prep time than a clean set with a single coat. A lacquer or conversion varnish finish holds up better than standard latex but costs more to apply correctly. Scope, condition, and materials all move the number. Every job is different, contact Cardona Painting for an accurate estimate. Related services worth knowing about: cabinet painting for bare-wood or new construction cabinetry, and cabinet resurfacing if you're replacing the door faces entirely.
Why Cabinet Renewal Fails Without Proper Prep Fails
The finish is only as good as what's underneath it.
Here's the honest truth: most cabinet paint failures aren't a product problem. They're a prep problem. Kitchen cabinets collect grease, steam, and grime over years of use. If you paint over that without breaking through it, the new finish sits on top of contamination instead of bonding to wood. It looks fine for six months. Then it starts to peel in exactly the spots that get touched the most, around knobs, along the bottom edges of doors, wherever hands land every day.
Cardona Painting starts every cabinet refinishing job with a thorough degreasing and cleaning before any sanding happens. Then we sand to give the primer a real surface to grip. Then we prime. We don't skip steps because a job is small or a customer seems like they won't notice. You'll notice eventually, and so will we.
THE PROCESS
How a Cabinet Refinishing Job Actually Works
Cabinet renewal isn't a one-day paint job. Done correctly, it's a multi-stage process where each step has to cure before the next one starts.
- 01
Remove, Clean, and Assess
Doors and drawer fronts come off so every surface gets treated flat. We clean with a degreaser strong enough to cut through years of kitchen buildup, then assess the existing finish, whether it needs a full strip, a scuff sand, or something in between. Skipping this step is how you get peeling paint in six months.
- 02
Sand, Fill, and Prime
We sand to bare or scuff depending on what the surface calls for, fill any dings or gouges, and apply a bonding primer that actually adheres to the substrate. The primer coat is what separates a paint job from a refinish. We let it cure fully before moving to topcoat, rushing this is the most common shortcut in the trade.
- 03
Topcoat and Reinstall
The finish coat goes on in thin, even passes to avoid runs and texture issues. We let it cure before reinstalling hardware and hanging doors back. You get cabinets that open and close properly, with a finish that's ready for daily use, not one that transfers to your fingertips for the first two weeks.
Proof, not promises
Recent Work
A few recent projects around Bastrop. Every one handled start to finish by Julio Cardona, not passed to a subcontractor.



SCOPE
Cabinet Painting vs. Refinishing vs. Resurfacing
These three terms get used interchangeably online. They're not the same job.
Cabinet painting usually refers to applying a finish to raw or previously unfinished wood. Cabinet refinishing means stripping or sanding the existing finish and recoating. It's a restoration. Cabinet resurfacing goes further: new door faces and drawer fronts over the existing box. Each one costs more than the last and solves a different problem.
If your cabinet boxes are solid and the doors are structurally sound, refinishing is almost always the right call. You get a like-new finish at a fraction of what new cabinets cost, and you're done in days instead of weeks. If the door faces are warped or damaged beyond what paint can hide, resurfacing makes more sense. Julio can walk you through which one fits your situation during the estimate, no pressure, just a straight answer.
What Makes This Worth Doing Instead of Replacing
New cabinets are a major construction project. The boxes come out, countertops often have to be disturbed, there's debris and disruption for weeks, and the cost is substantial. Cabinet refinishing gives you a kitchen that looks fresh without tearing anything out. The timeline is shorter, the disruption is minimal, and the finish, done right, will last for years under normal kitchen conditions.
That said, refinishing isn't right for every situation. If the cabinet boxes themselves are failing, or the wood is swollen from water damage, paint won't fix the underlying problem. We'll tell you that on the estimate rather than take the job and leave you with the same issue under a new coat of paint. Julio has been doing this work for five years and has turned down jobs that weren't a good fit. That's not common in this trade, but it's how we operate.
For homeowners who want to refresh more than just the cabinets, pairing the work with interior painting or trim painting makes sense, a coordinated finish across the whole room reads better than cabinets that don't match the walls.
Areas We Serve for Cabinet Work
Cardona Painting takes on cabinet refinishing jobs across Central Texas, including communities along the Hwy 71 corridor and into the Austin metro edge. If you're in any of the areas below, call (512) 786-6801 and we'll set up a time to look at the project.
- Cedar Creek
- Pflugerville
- Lockhart
- Smithville
- Elgin
- McDade
- Manor
- Del Valle
- East Austin
- Southeast Austin
Ready to Refinish? Call Julio for a Free Estimate
Five years of hands-on cabinet work, free estimates, and a straight answer on what your project actually needs.